NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
1-13
v1.0, June 2009
Removing the WNDA3100v2 Software
You can remove the wireless adapter software in these two ways:
• Select the Windows Start menu > All Programs > NETGEAR WNDA3100v2 Adapter
program group > Uninstall NETGEAR WNDA3100v2 Software, and then follow the screen
prompts.
• Select Windows Start menu >Control Panel > Add or Remove Program, and then select the
NETGEAR WNDA3100v2 Adapter option, and follow the screen prompts.
Upgrading the WNDA3100v2 Software
Upgrades might be available at the NETGEAR website. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR website Support page.
3. Remove the WNDA3100v2 software from your computer.
4. Remove the WNDA3100v2 adapter from your computer, and if prompted restart your
computer.
5. Run the installer that you downloaded (the file ends in .exe).
6. Follow the installer instructions, and if prompted, restart your computer.

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter Specifications

General

Brand	NETGEAR
Model	WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter
Category	Adapter
Language	English