NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
2-11
v1.0, June 2009
To create an Ad Hoc mode profile:
1. Click the icon to open the Smart Wizard. The Settings tab displays:
2. Enter the network settings.
a. Select Computer-to-Computer (Ad Hoc) for the network type.
b. Select or enter the network name (SSID) for the Ad Hoc network.
c. In the Profiles field, type the name of the profile.
d. Click Apply.
3. Save your settings in a profile.
a. Click Save Profile, and all the configuration settings are saved in this profile.
b. Click Apply, then click Close to exit the Smart Wizard, or click Cancel to return to the
previous settings.
4. Configure the computer network settings.
a. Configure each computer with either a static IP address or with the IPX protocol.
b. Restart the computers.
5. Verify wireless connectivity between your peer devices with the ping program:
Figure 2-9
To Next Page
Loading...
