What to do if the Powerline LED is off on my NETGEAR Adapter?
If the Powerline LED on your NETGEAR Adapter is off, it means the Powerline devices can't find each other. Ensure the devices are plugged into outlets with power and use the same network encryption key. Try moving the device closer to the computer or other devices. If you've changed the network encryption key, reset each device to its factory default settings.
How to fix a NETGEAR Adapter when the Power LED is off?
If the Power LED on your NETGEAR Adapter is off, ensure that the electrical outlet is supplying power and that the Powerline device is not plugged into an extension cord, power strip, or surge protector.
What to do if all LEDs are off on my NETGEAR XAV1601?
If all LEDs are off on your NETGEAR Adapter when it's plugged into the AC line, use the Powerline utility to check if the LEDs are turned off via the software. If they are, use the utility to turn them back on.
Why is the Ethernet LED not blinking on my NETGEAR XAV1601 Adapter?
If the Ethernet LED on your NETGEAR Adapter isn't blinking, it could be due to a lack of data traffic. First, ensure your router and modem are switched on. Also, verify the Ethernet cable is securely connected between the adapter port and a router LAN port and that the cable is working. Check if a PC connected directly to the router can access the Internet. As a last resort, you can press the Reset button on each device for 1 second to return the adapter to its factory default settings.
What to do if I have problems after changing the Network Encryption Key on my NETGEAR XAV1601 Adapter?
If you're experiencing problems after changing the network encryption key on your NETGEAR Adapter, it might be because the encryption key is not the same for every Powerline device. Make sure all Powerline devices are plugged in. Use the Powerline utility to set the encryption key for all remote Powerline devices and for the local Powerline device.
Why is the Power LED amber on my NETGEAR XAV1601 Adapter?
If the Power LED on your NETGEAR Adapter is amber, the adapter has entered power saving mode because the Ethernet port has not been linked for more than 10 minutes. It will return to normal mode when the Ethernet port is linked.
General| Type | Powerline Adapter |
|---|---|
| Model | XAV1601 |
| Maximum Data Rate | 1600 Mbps |
| Security | 128-bit AES encryption |
| Ports | Gigabit Ethernet |
| Standards | IEEE 802.3, IEEE 802.3u |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 90% maximum (non-condensing) |
To Next Page
