Appendix | 21
3
3. Troubleshooting
This chapter provides information about troubleshooting your XAV1601 Powerline AV+ 200
Nano.
Product Registration and Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it to
register your product at
http://www.netgear.com/register. Registration is required before you can
use our telephone support service. Registration via our website is strongly recommended.
Product updates and Web support are always available at: http://support.netgear.com.
Basic Functioning
After you turn on power to the XAV1601, the following sequence of events should occur:
1. When power is first applied, verify that the Power LED is on.
2. After approximately 10 seconds, verify that:
a. The Power LED is solid green.
b. The Powerline LED is lit.
c. The Ethernet LED on the Powerline XAV1601 Nano lights or blinks.
To Next Page
Loading...
Need help?
General