NETGEAR XS712T User Manual

10
XS712T Smart Switch
Front Panel and Back Panel Configuration
The smart switch has 12 100M/1000M/10G copper ports and two combo 1000 Mbps/10 Gbps
SFP+ fiber ports. Each port is capable of sensing the line speed and negotiating the duplex
mode with the link partner automatically.
The following figure illustrates the front panel of the smart switch.
Power
Reset
Fan
Factory
Defaults
XS712T
1 2 3 4 5 6 7 8
9 10 11T
11F 12F
12T
Power and
Link/Speed/ACT LEDs
100M/10G
SFP ports
Reset button
Factory
Defaults button
Fan LEDs
100M/1000M/10G Ethernet ports
Figure 2. Front panel
The front panel contains the following:
• 12 RJ-45 co
nnectors for 100M/1000M/10G AutoSensing Gigabit Ethernet switching ports
• T
wo combo 1000 Mbps/10 Gbps SFP+ Gigabit Ethernet switching ports
• Reset
button to restart the device
• Recesse
d Factory Defaults button to restore the device back to the factory defaults
• Lin
k, Speed, and ACT LEDs for each port
• Power and
Fan LEDs
The following figure illustrates the
smart switch back panel.
Power connector
Kensington Lock™ slot
Figure 3. Back panel
The back panel contains a power connector.
LED Designations
The following sections describe the LED designations.

NETGEAR XS712T Specifications

General

Brand	NETGEAR
Model	XS712T
Category	Switch
Language	English