21
Click Turn Output Off to confirm the switch-off or Cancel to keep the output switched on.
To suppress this dialog in the future, check Don’t ask me again.
2) The Reset button switches the output off and then back on. It is actiove only when the output
is On. A confirmation is requested before the action is performed. The function is enabled only when
the output is switched on. When the output is switched off, the Reset button is disabled.
Click Reset to confirm the action or Cancel to cancel it.
To suppress this dialog in the future, check Don’t ask me again.
The Scheduler button enable/disable a Scheduler feature for the specific output. Details and
setting are described below at chapter Outputs - Schedule.
To Next Page
Loading...
