71
5.6.4 System
This section allows performing basic settings and viewing basic parameters of the device.
Figure 36 – System settings
Time since the last restart of the device.
Currently installed firmware version and a link to the Firmware tab.
Shown in NETIO Discover and under the device logo in the web
administration (in the figure above: PowerBOX-4Kx under the PowerBOX
logo in the top left corner).
The device “Hostname” is generated from this Device name
(unsupported characters are replaced).
Current http port for webadministration and http based M2M API
protocols (XML, JSON, URL API). If the port number is different from 80,
it has to be specified in the web browser after the NETIO device IP
address, e.g.: 192.168.0.99:888
Enable Periodic device restart
Enables automatic restarting of the device.
To Next Page
Loading...
