Netio PowerBOX 3PF - Page 72

72
Restart period
Specifies the interval for automatic device restarts. The restart does not
affect the state of the output.
Debug Log
Adds a DebugLog section with diagnostic values to XML and JSON M2M
API.
Save Changes
Saves the changes.
Locate
Identifies a particular device. When clicked, the yellow LED no. 1 starts
flashing with pauses.
Reset Power Consumption
Counter
Resets the electricity consumption counters.
Factory Reset Defaults
Resets NETIO device to factory defaults. Follow section 3.1 to make the
device operational again.
Export and import device
configuration
Can be used to back-up and restore device configuration. Do not modify
the exported file!
“Export configuration” – shows a confirmation dialog for exporting the
device configuration and downloading it to your computer.
“Browse” – opens a dialog to select a configuration file for import into
the device.
“Import configuration” – shows a confirmation dialog for importing the
device configuration. After the import, the device restarts and the
imported configuration takes effect.