Netio PowerBOX 3PF - M2 M API Protocol - MQTT-Flex

49
5.2.6 M2M API Protocol – MQTT-flex
Figure 24 – MQTT-flex protocol configuration
Enable MQTT-flex
Enables MQTT-flex functions in the system.
MQTT-flex Config:
Text area for entering the MQTT-flex configuration.
Save Changes
Saves the changes.
When the MQTT-flex is enabled, other M2M protocols are disabled. After clicking Save changes, you
will be asked to confirm the deactivation of the other protocols.
Click Confirm to confirm the action or Cancel to return to the MQTT-flex protocol configuration.
NETIO device uses json to define the MQTT-flex structure (MQTT-flex Config). Both subscribe and
publish topics can be defined. Publish topics may include actions that initiate a transmission.