<ID>4</ID>
<Name>Power output 4</Name>
<State>1</State>
<Action>6</Action>
<Delay>2020</Delay>
<PowerFactor>0.99</PowerFactor>
<Phase>0.14</Phase>
<Load>42</Load>
<Current>174</Current>
<Energy>18099</Energy>
<ReverseEnergy>0</ReverseEnergy>
<EnergyNR>22170</EnergyNR>
<ReverseEnergyNR>0</ReverseEnergyNR>
</Output>
</Outputs>
</set:Root>
The following example XML files for controlling the device can be downloaded directly from the web
administration:
Set output 1 to ON
Set output 1 to OFF
Toggle output 1
Click Download XML Schema (XSD) to download the .xsd schema file.
The Upload XML file to the device button opens the following dialog for testing:
Host – URL of the .xml file.
Port – port number used by the XML API
protocol.
Username and Password – Username and
password configured for the XML API protocol in
the READ-WRITE section.
Request #1,2,3 – select .xml file(s) with
commands to perform.
Send file – send the selected file(s).
Response – response to the submitted
command.
Close – closes the dialog window.
Figure 18 – Upload XML file dialog
To Next Page
Loading...
