Netio PowerBOX 3PF - Page 56

56
Download MIB file
Use this button tu download MIB.
When the SNMP API is enabled, other M2M protocols are disabled. After clicking Save changes, you
will be asked to confirm the deactivation of the other protocols.
Click Confirm to confirm the action or Cancel to return to the SNMP API protocol configuration.
The MIB can be downloade from a device web administrator as described above.
Following standard MIBs are also required:
 SNMPv2-SMI
 SNMPv2-TC
Monitoring (read)
x = Output/Input number
Object
OID
Type
Value
example
Note
netioOutputID.x.0
1.3.6.1.4.1.47952.1.1.1.1.x.0
INTEGER
1
netioOutputName.x.0
1.3.6.1.4.1.47952.1.1.1.2.x.0
STRING
output_1
Based on user
defined name
netioOutputState.x.0
1.3.6.1.4.1.47952.1.1.1.3.x.0
INTEGER
off(0), on(1)
netioOutputStateString.x.0
1.3.6.1.4.1.47952.1.1.1.4.x.0
STRING
"off", "on"
netioOutputLoad.x.0
1.3.6.1.4.1.47952.1.1.1.25.x.0
INTEGER
24
[W]
netioOutputEnergy.x.0
1.3.6.1.4.1.47952.1.1.1.26.x.0
INTEGER
13
[Wh]
netioOutputEnergyStart.x.0
1.3.6.1.4.1.47952.1.1.1.27.x.0
DateAnd
Time
2017-6-
23,5:47:3.0,+
0:0
Initial date and
time. UTC based
*1
netioOutputCurrent.x.0
1.3.6.1.4.1.47952.1.1.1.28.x.0
INTEGER
195
[mA]
netioOutputPowerFactor.x.0
1.3.6.1.4.1.47952.1.1.1.29.x.0
INTEGER
534
Current power
factor * 1000
netioOutputPowerFactor.x.0
1.3.6.1.4.1.47952.1.1.1.30.x.0
INTEGER
31683
[°] * 100
netioOutputReverseEnergy.x.0
1.3.6.1.4.1.47952.1.1.1.31.x.0
INTEGER
4747
[Wh]