Netio PowerBOX 3PF - Page 67

67
Set static IP address
Manual configuration of network parameters. Select this option if your
network does not have a DHCP server.
IP address
Choose an unused IP address in your network’s address range.
Net mask
Set the network mask according to your network’s address range.
Default gateway
Address of the network gateway. Corresponds to the address of your
router’s LAN interface.
DNS server
IP address of the domain name server. It is usually the same as the
gateway address, as long as the DNS function is enabled on the router. If
unsure, enter a public DNS server, such as: 8.8.8.8
Hostname
Name of the device in the local network. It is generated from the Device
name (unsupported characters are replaced).
Save Changes
Saves the changes.
Caution
After changing the network configuration, it may be necessary to re-discover the NETIO device
at its new address. The discovery procedure is described in section Detecting and configuring
the IP address .