netis Wireless N Range Extender Quick Installation Guide
1) Please make sure that your main router can connect to the Internet successfully.
2) Plug E1+ to a standard electrical socket.
Note: Please place the E1+ closely to your main router when you setup extender.
Also after you are successfully connected, you can move your E1+ to other areas.
3.1.1 Hardware Connection
Please check the correct application according to your network
environment, and follow the corresponding steps for the selected
application.
Installation for Application 1: Range Extender Mode
You can setup E1+ in two ways: pressing WPS Button or via Web
Management Page.
3.1.2 Configuration
Method A: Range Extender setup via WPS Button (Particularly recommended)
Note: Please make sure that the main router is with WPS Button, and the function
is enabled. If you cannot find WPS function, please turn to “Method B: Extender
setup via Web Management Page”.
Main Router
WPS
E1+
3
To Next Page
Loading...