Wireless-N USB Adapter User Manual
4.2 Advanced
Figure 4-3
Beacon Interval: This represents the amount of time between beacon transmissions. Before a
station enters power save mode, the station needs the beacon interval to know when to wake
up to receive the beacon (and learn whether there are buffered frames at the access point)
DTIM period: The DTIM period is set on the TIM information element on the DTIM period
field. This field is one byte and represents the number of beacon intervals that must go by
before a new DTIM is sent.
Preamble Mode: "Short" is suitable for heavy traffic wireless network. "Long" provides
much communication reliability; the default setting is "Short”
Set defaults: Set the options in advanced to default
Apply: Save the options
To Next Page
Loading...
