Netum NT-W5 User Manual

NT-W5
Quick Setup Guide
This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug
the USB cable on your device , setup keyboard language before you use it. (refer to below Keyboard
Language Type) after that the scanner can start to work.
If you want to do other configurations please refer to below programming barcodes.
Barcode Programming
Netum barcode scanners are factory programmed for common terminal and communications
settings. If you need to change these settings, programming is accomplished by scanning the bar
codes in this guide. An asterisk (*) next to an option indicates the default setting.
Communication Mode
USB -KBW
When you connect the scanner to the Host via a USB connection, you can enable the USB-KBW
feature by scanning the barcode below. It works on a Plug and Play basis and no driver is
required.
USB KBW*
USB Serial Port
If you connect scanner to the Host via a USB connection, the USB COM Port Emulation feature
allows the Host to receive data in the way as a serial port does.

Netum NT-W5 Specifications

General

Brand	Netum
Model	NT-W5
Category	Barcode Reader
Language	English

Summary

Barcode Programming

Communication Mode

USB-KBW

Enables USB-KBW feature for Plug and Play connection without drivers.

USB Serial Port

Allows host to receive data via USB as a serial port.

Keyboard Language

America Keyboard

Sets the keyboard language to American English, which is the default.

Portugal Keyboard

Sets the keyboard language to Portuguese.

Franc Keyboard

Sets the keyboard language to French.

Spain Keyboard

Sets the keyboard language to Spanish.

Germany Keyboard

Sets the keyboard language to German.

Turkey Q Keyboard

Sets the keyboard language to Turkish (QWERTY).

Italy Keyboard

Sets the keyboard language to Italian.

Hungary Keyboard

Sets the keyboard language to Hungarian.

Czech Keyboard

Sets the keyboard language to Czech.

Scanning Mode

Key Holding

Scanner operates by holding the trigger button for reading.

Continuous Mode

Scanner performs continuous work without manual trigger presses.

Auto Sense Mode

Scanner triggers reading based on ambient brightness changes.

Terminator Configuration

Disable Terminator

Disables the terminator suffix.

CR & LF Terminator

Sets the terminator suffix to Carriage Return and Line Feed.

CR Terminator

Sets the terminator suffix to Carriage Return.

TAB Terminator

Sets the terminator suffix to Tab.

Beeper Volume

Low Beeper Volume

Sets the beeper volume to low.

Medium Beeper Volume

Sets the beeper volume to medium.

High Beeper Volume

Sets the beeper volume to high.

Mute Function

Disable Mute

Disables the scanner's audible prompts.

Enable Mute

Enables the scanner's audible prompts.

Default Configuration

Transmit Code ID Character

Symbol Code ID

Identifies barcode type using Symbol Code Identifiers.

Aim Code ID

Identifies barcode type using AIM Code Identifiers.

None Code ID

Disables the transmission of Code ID characters.

Common Barcode Symbology Enable/Disable

Enable/Disable UPC-A

Allows enabling or disabling the UPC-A barcode symbology.

Enable/Disable UPC-E

Allows enabling or disabling the UPC-E barcode symbology.

Enable/Disable EAN-8

Allows enabling or disabling the EAN-8 barcode symbology.

Enable/Disable EAN-13

Allows enabling or disabling the EAN-13 barcode symbology.

Bookland EAN(ISBN) Enable/Disable

Enable/Disable Bookland EAN(ISBN)

Allows enabling or disabling the Bookland EAN (ISBN) symbology.

Decode UPC/EAN Supplementals

Ignore UPC/EAN with Supplementals

Scanner reads barcodes regardless of whether supplementals are present.

Only Read Supplementals

Scanner reads only barcodes that include supplementals.

Auto Read Supplementals

Scanner reads barcodes with or without supplementals.

Transmit Check Digits and Conversion

Transmit UPC-A Check Digit

Controls the transmission of the UPC-A check digit.

Transmit UPC-E Check Digit

Controls the transmission of the UPC-E check digit.

Convert UPC-E to UPC-A

Converts UPC-E data to UPC-A format before transmission.

Code 128 Configuration

Enable/Disable Code 128

Allows enabling or disabling the Code 128 barcode symbology.

Code 39 Configuration

Enable/Disable Code 39

Allows enabling or disabling the Code 39 barcode symbology.

Transmit Code 39 Check Digit

Controls the transmission of the Code 39 check digit.

Code 39 Full ASCII Configuration

Enable/Disable Code 39 Full ASCII

Allows enabling or disabling the Code 39 Full ASCII variant.

Code 93 Configuration

Enable/Disable Code 93

Allows enabling or disabling the Code 93 barcode symbology.

Code 11 Configuration

Enable/Disable Code 11

Allows enabling or disabling the Code 11 barcode symbology.

Transmit Code 11 Check Digits

Controls the transmission of Code 11 check digits.

Interleaved 2 of 5 Configuration

Enable/Disable Interleaved 2 of 5

Allows enabling or disabling the Interleaved 2 of 5 symbology.

Transmit I 2 of 5 Check Digit

Controls the transmission of the Interleaved 2 of 5 check digit.

Convert 12 of 5 to EAN-13

Discrete 2 of 5/Industrial 2 of 5 Configuration

Enable/Disable Discrete 2 of 5

Allows enabling or disabling the Discrete 2 of 5 symbology.

Matrix 25 Configuration

Enable/Disable Matrix 25

Allows enabling or disabling the Matrix 25 barcode symbology.

Transmit Matrix 25 Check Character

Controls the transmission of the Matrix 25 check character.

Codabar Configuration

Enable/Disable Codabar

Allows enabling or disabling the Codabar barcode symbology.

MSI/MSI PLESSEY Configuration

Enable/Disable MSI

Allows enabling or disabling the MSI/MSI Plessey barcode symbology.

Transmit MSI Check Digit

Controls the transmission of the MSI check digit.

GS1 DataBar/RSS Configuration

Enable/Disable GS1 DataBar-14

Allows enabling or disabling the GS1 DataBar-14 symbology.

Enable/Disable GS1 DataBar Limited

Allows enabling or disabling the GS1 DataBar Limited symbology.

Enable/Disable GS1 DataBar Expanded

Allows enabling or disabling the GS1 DataBar Expanded symbology.

PDF417 Configuration

Enable/Disable PDF417

Allows enabling or disabling the PDF417 barcode symbology.

QR Code Configuration

Enable/Disable QR

Allows enabling or disabling the QR Code barcode symbology.

Data Matrix(DM) Configuration

Enable/Disable Data Matrix(DM)

Allows enabling or disabling the Data Matrix (DM) barcode symbology.

Maxi Code Configuration

Enable/Disable Maxi Code

Allows enabling or disabling the Maxi Code barcode symbology.

Prefix/Suffix Values Configuration

Scan Prefix Value

Scans a barcode to set a prefix value for transmitted data.

Scan Suffix 1 Value

Scans a barcode to set the first suffix value for transmitted data.

Scan Suffix 2 Value

Scans a barcode to set the second suffix value for transmitted data.

Prefix Setting Example

Illustrates setting prefix values using sequence of barcodes.

Suffix Setting Example

Illustrates setting suffix values using sequence of barcodes.

Scan Data Transmission Format

Functional Key Set Configuration

Disable Functional Key Set

Disables the functional key set feature.

Enable Functional Key Set

Enables the functional key set feature, allowing custom key assignments.

Numeric Bar Codes

Setting Prefixes and Suffixes Via Serial Commands

Symbol Code Identifiers

AIM Code Identifiers

Appendix 2 Functional Key Set Mapping