Netum NT-1202 User Manual

NT-1202
Quick Setup Guide
This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug
the USB cable on your device , setup keyboard language before you use it. (refer to below Keyboard
Language Type) after that the scanner can start to work.
If you want to do other configurations please refer to below programming barcodes.
Barcode Programming
Netum barcode scanners are factory programmed for common terminal and communications
settings. If you need to change these settings, programming is accomplished by scanning the bar
codes in this guide. An asterisk (*) next to an option indicates the default setting.
Communication Mode
USB -KBW
When you connect the scanner to the Host via a USB connection, you can enable the USB-KBW
feature by scanning the barcode below. It works on a Plug and Play basis and no driver is
required.
USB KBW*
USB Serial Port
If you connect scanner to the Host via a USB connection, the USB COM Port Emulation feature
allows the Host to receive data in the way as a serial port does.
USB Serial Port

Netum NT-1202 Specifications

General

Brand	Netum
Model	NT-1202
Category	Barcode Reader
Language	English

Summary

Quick Setup Guide

USB2.0 Wired Connection

Describes the USB2.0 wired connection for plug and play scanner setup.

Barcode Programming

Communication Mode Settings

Explains how to set communication modes via scanning programming barcodes.

USB-KBW Mode

Details the USB-KBW communication mode for plug and play operation.

USB Serial Port Mode

Explains the USB Serial Port communication mode for data transmission.

Keyboard Language Configuration

America Keyboard Setting

Sets the keyboard language to US English for scanner operation.

France Keyboard Setting

Sets the keyboard language to French for scanner operation.

Germany Keyboard Setting

Sets the keyboard language to German for scanner operation.

Spain Keyboard Setting

Sets the keyboard language to Spanish for scanner operation.

Scanning Mode Options

Key Holding Mode

Describes the Key Holding scanning mode where button press triggers reading.

Continuous Mode

Explains the Continuous scanning mode for uninterrupted scanning.

Auto Sense Mode

Details the Auto Sense scanning mode based on environmental brightness.

Terminator Configuration

Terminator Options

Sets the terminating character suffix like CR or CRLF.

Beeper Volume Control

Low Beeper Volume

Sets the scanner's decode beep volume to a low level.

Medium Beeper Volume

Sets the scanner's decode beep volume to a medium level.

High Beeper Volume

Sets the scanner's decode beep volume to a high level.

Prompt Mute Settings

Disable All Prompts

Disables all audible and visual scanner prompts.

Enable All Prompts

Enables all audible and visual scanner prompts.

Default Configuration

Code ID Transmission Settings

Symbol Code ID Transmission

Configures the transmission of symbol code identifiers.

AIM Code ID Transmission

Configures the transmission of AIM code identifiers.

None Code ID Transmission

Disables the transmission of any code ID characters.

Common Symbology Enable/Disable

UPC-A Symbology Control

Enables or disables the UPC-A barcode symbology.

UPC-E Symbology Control

Enables or disables the UPC-E barcode symbology.

EAN-8 Symbology Control

Enables or disables the EAN-8 barcode symbology.

EAN-13 Symbology Control

Enables or disables the EAN-13 barcode symbology.

Bookland EAN/ISBN Configuration

UPC/EAN Supplemental Decoding

Ignore Supplementals

Ignores supplemental barcodes during scanning.

Read Supplementals Only

Reads only barcodes that have supplemental data.

Auto Read Supplementals

Automatically reads barcodes with or without supplementals.

UPC Check Digit Transmission

Transmit UPC-A Check Digit

Controls the transmission of UPC-A check digits.

Transmit UPC-E Check Digit

Controls the transmission of UPC-E check digits.

UPC-E to UPC-A Conversion

Enable UPC-E to UPC-A Conversion

Enables UPC-E data conversion to UPC-A format.

Disable UPC-E to UPC-A Conversion

Disables UPC-E data conversion to UPC-A format.

Code 128 Configuration

Enable/Disable Code 128

Controls the Code 128 barcode symbology.

Code 39 Configuration

Enable/Disable Code 39

Controls the Code 39 barcode symbology.

Code 39 Check Digit Transmission

Code 39 Full ASCII Configuration

Code 93 Configuration

Enable/Disable Code 93

Controls the Code 93 barcode symbology.

Code 11 Configuration

Enable/Disable Code 11

Controls the Code 11 barcode symbology.

Code 11 Check Digit Transmission

Interleaved 2 of 5 Configuration

Enable/Disable Interleaved 2 of 5

Controls the Interleaved 2 of 5 barcode symbology.

Interleaved 2 of 5 Check Digit Transmission

Convert Interleaved 2 of 5 to EAN-13

Discrete 2 of 5 Configuration

Enable Discrete 2 of 5

Enables the Discrete 2 of 5 barcode symbology.

Disable Discrete 2 of 5

Disables the Discrete 2 of 5 barcode symbology.

Matrix 25 Configuration

Enable/Disable Matrix 25

Controls the Matrix 25 barcode symbology.

Matrix 25 Check Character Transmission

Codabar Configuration

Enable/Disable Codabar

Controls the Codabar barcode symbology.

MSI/MSI Plessey Configuration

Enable/Disable MSI

Controls the MSI/MSI Plessey barcode symbology.

GS1 DataBar/RSS Configuration

Enable/Disable GS1 DataBar-14

Controls the GS1 DataBar-14 barcode symbology.

Enable/Disable GS1 DataBar Limited

Controls the GS1 DataBar Limited barcode symbology.

Enable/Disable GS1 DataBar Expanded

Controls the GS1 DataBar Expanded barcode symbology.

PDF417 Configuration

Enable/Disable PDF417

Controls the PDF417 barcode symbology.

QR Code Configuration

Enable/Disable QR Code

Controls the QR Code barcode symbology.

Data Matrix(DM) Configuration

Enable/Disable Data Matrix(DM)

Controls the Data Matrix(DM) barcode symbology.

Maxi Code Configuration

Enable/Disable Maxi Code

Controls the Maxi Code barcode symbology.

Prefix/Suffix Values Setup

Scan Prefix Value

Scans a barcode to set a prefix for data transmission.

Scan Suffix 1 Value

Scans a barcode to set the first suffix for data transmission.

Scan Suffix 2 Value

Scans a barcode to set the second suffix for data transmission.

Scan Data Transmission Format

Functional Key Set Configuration

Appendix 1: Numeric Bar Codes