Netum NT-1202 - Functional Key Set Configuration; Appendix 1: Numeric Bar Codes

<PREFIX> <DATA> <SUFFIX 2> <PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>
Enable /Disable Functional Key Set
Disable Functional Key Set* Enable Functional Key Set
For example if you scan value 1004, Keystroke will be “Up Down”.
But if you scan Enable Functional Key Set after you scan the value ” 1004”, you will get
functional key set Ctrl +D. For more details please refer to Appendix 2.
4. Appendix 1
Numeric Bar Codes
For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).
Numeric Bar Codes
For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).
0