Netum NT-1228BL User Manual

1
V20.1.2
NT-1228BL Manual
Contents
Firmware Version ....................................................................................................................................... - 1 -
Barcode Programming ............................................................................................................................... - 1 -
Connection Way ......................................................................................................................................... - 1 -
Working via USB Cable ....................................................................................................................... - 1 -
Working via 2.4G receiver .................................................................................................................. - 1 -
Working via Bluetooth ....................................................................................................................... - 1 -
Connection Modes: .................................................................................................................................... - 2 -
Wired Connection .............................................................................................................................. - 2 -
USB HID-KBW ............................................................................................................................. - 2 -
USB COM Port Emulation ........................................................................................................... - 2 -
RF Wireless Connection. .................................................................................................................... - 2 -
*RF DONGLE HID-KBW ............................................................................................................... - 2 -
RF DONGLE AS VIRTUAL COM .................................................................................................... - 2 -
Bluetooth Connection ........................................................................................................................ - 3 -
Basic Mode (HID) (default) ......................................................................................................... - 3 -
How to pair bluetooth under Basic Mode (HID) ? .................................................................... - 3 -
Bluetooth keyboard Upload Speed ........................................................................................... - 3 -
BLE Mode ................................................................................................................................... - 4 -
SPP Mode ................................................................................................................................... - 4 -
Keyboard Language .................................................................................................................................... - 5 -
DATA UPLOADING MODE .......................................................................................................................... - 7 -
Quit Offline Mode .............................................................................................................................. - 7 -
Offline Mode ...................................................................................................................................... - 7 -
Output Stored Data ............................................................................................................................ - 7 -
Output Total Entry ............................................................................................................................. - 7 -
Clear Memory .................................................................................................................................... - 7 -
Get Battery Volume ................................................................................................................................... - 8 -
Idle time ..................................................................................................................................................... - 8 -
Convert Case .............................................................................................................................................. - 8 -
Terminator ................................................................................................................................................. - 9 -
IOS Keyboard POP UP/HIDE ....................................................................................................................... - 9 -
Beeper ........................................................................................................................................................ - 9 -
Restore factory default ............................................................................................................................ - 10 -
Transmit Code ID Character ..................................................................................................................... - 11 -
Symbol Code ID Identifiers ............................................................................................................... - 11 -
AIM Code Identifiers ........................................................................................................................ - 11 -
All Symbologies ........................................................................................................................................ - 12 -
1D Symbologies ................................................................................................................................ - 12 -
2D Symbologies ................................................................................................................................ - 13 -
1D Inverse Barcode ......................................................................................................................... - 13 -
Decode UPC/EAN Supplementals UPC/EAN .................................................................................... - 14 -
UPC-A ............................................................................................................................................... - 14 -
Enable/Disable UPC-A .............................................................................................................. - 14 -
Transmit Preamble Character .................................................................................................. - 15 -
UPC-A Transmit Check Character ............................................................................................. - 15 -
UPC-A Add-On Code ................................................................................................................. - 15 -
UPC-A Add-On Code Required ................................................................................................. - 16 -
UPC-E................................................................................................................................................ - 16 -
Enable/Disable UPC-E .............................................................................................................. - 16 -

Netum NT-1228BL Specifications

General

Model	NT-1228BL
Operating Frequency	2.4 GHz
Connectivity	Bluetooth
Scanning Capability	1D & 2D Barcodes
Scanning Speed	200 scans per second
Light Source	650nm Laser Diode
Operating Distance	10m / 33ft for Bluetooth mode
Scanning Distance	10-500mm
Compatibility	Android, iOS, Windows
Interface	USB
Operating Voltage	5 VDC
Bluetooth Range	10m

Summary

Connection Way

Working via USB Cable

Connect scanner via USB cable for data transfer.

Working via 2.4G receiver

Connect scanner via 2.4G USB receiver for wireless data transfer.

Working via Bluetooth

Connect scanner via Bluetooth for wireless data transfer.

EAN-8

Enable/Disable EAN-8

Enable or disable the EAN-8 barcode scanning.

EAN-8 Add-On Code

Manage add-on codes for EAN-8 barcodes.

EAN-13

Enable/Disable EAN-13

Enable or disable the EAN-13 barcode scanning.

EAN-13 Add-On Code

Manage add-on codes for EAN-13 barcodes.

Code 11

Enable/Disable Code 11

Enable or disable the Code 11 barcode scanning.

Set Lengths for Code 11

Configure length settings for Code 11 barcodes.

Interleaved 2 of 5/ITF

Enable/Disable Interleaved 2 of 5

Enable or disable Interleaved 2 of 5 barcode scanning.

Set Lengths for Interleaved 2 of 5

Configure length settings for Interleaved 2 of 5 barcodes.

GS1 DataBar/RSS

Enable/Disable GS1 DataBar-14

Enable or disable GS1 DataBar-14 scanning.

Enable/Disable GS1 DataBar Limited

Enable or disable GS1 DataBar Limited scanning.

PDF417

Enable/Disable PDF417

Enable or disable PDF417 barcode scanning.

Firmware Version

Barcode Programming

Connection Modes

Wired Connection

Scanner connection using USB cables.

USB HID-KBW

Connect via USB in Human Interface Device Keyboard mode.

RF Wireless Connection

Scanner connection using RF dongle.

RF DONGLE HID-KBW

Connect via RF dongle in HID Keyboard mode.

Bluetooth Connection

Basic Mode (HID) (default)

Set scanner to HID mode for Bluetooth communication.

Bluetooth keyboard Upload Speed

Configure the upload speed for Bluetooth keyboard mode.

BLE Mode

SPP Mode

Keyboard Language

* America EN keyboard

Set keyboard layout to US English.

French keyboard

Set keyboard layout to French.

DATA UPLOADING MODE

Offline Mode

Activate offline mode for data storage.

Quit Offline Mode

Exit offline mode and return to normal operation.

Clear Memory

Get Battery Volume

Idle time

Disable Sleep Mode

Disable the scanner's automatic sleep mode.

Convert Case

Terminator

None

Disable terminating characters.

CR&LF *

Set CR+LF as the terminating character.

CR

Set Carriage Return as the terminating character.

Beeper

Beeper

BEEP OFF

Disable the scanner's audible beep.

*High Volume

Set beep volume to high.

Middle Volume

Set beep volume to medium.

Restore factory default

All Symbologies

Disable All Symbologies

Disable scanning for all barcode types.

Enable All Symbologies

Enable scanning for all barcode types.

1D Symbologies

Enable 1D Symbologies

Enable scanning for 1D barcodes.

2D Symbologies

Enable 2D Symbologies

Enable scanning for 2D barcodes.

Disable 2D Symbologies

Disable scanning for 2D barcodes.

1D Inverse Barcode

* Disable to read 1D reverse barcode

Disable scanning of inverted 1D barcodes.

UPC-A

Enable UPC-A

Enable scanning for UPC-A barcodes.

Disable UPC-A

Disable scanning for UPC-A barcodes.

UPC-A Add-On Code

Enable 2-Digit Add-On Code

Enable decoding of 2-digit UPC-A add-on codes.

*Disable 2-Digit Add-On Code

Disable decoding of 2-digit UPC-A add-on codes.

Enable 5-Digit Add-On Code

Enable decoding of 5-digit UPC-A add-on codes.

UPC-A Add-On Code Required

UPC-A Add-On Code Required

Only read UPC-A barcodes with add-on codes.

UPC-E Add-On Code

Enable 2-Digit Add-On Code

Enable decoding of 2-digit UPC-E add-on codes.

*Disable 2-Digit Add-On Code

Disable decoding of 2-digit UPC-E add-on codes.

Enable 5-Digit Add-On Code

Enable decoding of 5-digit UPC-E add-on codes.

UPC-E Add-On Code Required

UPC-E Add-On Code Required

Only read UPC-E barcodes with add-on codes.

EAN-8

*Enable EAN-8

Enable scanning for EAN-8 barcodes.

Disable EAN-8

Disable scanning for EAN-8 barcodes.

EAN-8 Add-On Code

Enable 2-Digit Add-On Code

Enable decoding of 2-digit EAN-8 add-on codes.

*Disable 2-Digit Add-On Code

Disable decoding of 2-digit EAN-8 add-on codes.

Enable 5-Digit Add-On Code

Enable decoding of 5-digit EAN-8 add-on codes.

EAN-8 Add-On Code Required

EAN-8 Add-On Code Required

Only read EAN-8 barcodes with add-on codes.

EAN-13

*Enable EAN-13

Enable scanning for EAN-13 barcodes.

Disable EAN-13

Disable scanning for EAN-13 barcodes.

EAN-13 Add-On Code

Enable 2-Digit Add-On Code

Enable decoding of 2-digit EAN-13 add-on codes.

*Disable 2-Digit Add-On Code

Disable decoding of 2-digit EAN-13 add-on codes.

EAN-13 Add-On Code Required

EAN-13 Add-On Code Required

Only read EAN-13 barcodes with add-on codes.

Bookland EAN(ISBN)

Enable Bookland EAN

Enable scanning for Bookland EAN barcodes.

*Disable Bookland EAN

Disable scanning for Bookland EAN barcodes.

Bookland ISBN

*Bookland ISBN-10

Enable/disable Bookland ISBN-10 scanning.

Bookland ISBN-13

Enable/disable Bookland ISBN-13 scanning.

Code 128

*Enable Code 128

Enable scanning for Code 128 barcodes.

Disable Code 128

Disable scanning for Code 128 barcodes.

GS1-128 (UCC/EAN-128)

*Enable GS1-128

Enable scanning for GS1-128 barcodes.

Disable GS1-128

Disable scanning for GS1-128 barcodes.

ISBT 128

*Enable ISBT 128

Enable scanning for ISBT 128 barcodes.

Disable ISBT 128

Disable scanning for ISBT 128 barcodes.

Code39

*Enable Code 39

Enable scanning for Code 39 barcodes.

Disable Code 39

Disable scanning for Code 39 barcodes.

Set Length Range for Code39

One Discrete Length

Set Code 39 to decode only a single specified length.

Two Discrete Lengths

Set Code 39 to decode only two specified lengths.

Length Within Range

Set Code 39 to decode within a specified length range.

Code 39 Check Digit Verification

Verify Code 39 Check Digit

Enable verification of Code 39 check digits.

*Do Not Verify Code 39 Check Digit

Disable verification of Code 39 check digits.

Transmit Code 39 Check Digit

Enable/Disable Code 39 Full ASCII

Code 32

* Disable Code 32

Disable scanning for Code 32 barcodes.

Enable Code 32

Enable scanning for Code 32 barcodes.

Code 93

Enable Code 93

Enable scanning for Code 93 barcodes.

*Disable Code 93

Disable scanning for Code 93 barcodes.

Set Lengths for Code93

One Discrete Length

Set Code 93 to decode only a single specified length.

Two Discrete Lengths

Set Code 93 to decode only two specified lengths.

Length Within Range

Set Code 93 to decode within a specified length range.

Code 93 Check Digit Verification

*Verify Code 93 Check Digit

Enable verification of Code 93 check digits.

Code 11

Enable Code 11

Enable scanning for Code 11 barcodes.

*Disable Code 11

Disable scanning for Code 11 barcodes.

Set Lengths for Code 11

Code 11 - One Discrete Length

Set Code 11 to decode only a single specified length.

Code 11 Check Digit Verification

* Disable Code 11 Check Digit Verification

Disable Code 11 check digit verification.

Enable One Check Digit

Enable one check digit verification for Code 11.

Interleaved 2 of 5/ITF

*Enable Interleaved 2 of 5

Enable scanning for Interleaved 2 of 5 barcodes.

Disable Interleaved 2 of 5

Disable scanning for Interleaved 2 of 5 barcodes.

1 2 of 5 Check Digit Verification

Verify I 2 of 5 Check Digit

Enable verification of I 2 of 5 check digits.

*Do Not Verify I 2 of 5 Check Digit

Disable verification of I 2 of 5 check digits.

ITF14

Enable ITF14

Enable scanning for ITF14 barcodes.

*Disable ITF14

Disable scanning for ITF14 barcodes.

Discrete 2 of 5/Industrial 2 of 5/IND25

Enable Discrete 2 of 5

Enable scanning for Discrete 2 of 5 barcodes.

*Disable Discrete 2 of 5

Disable scanning for Discrete 2 of 5 barcodes.

Discrete 2 of 5 Check Digit Verification

Verify D 2 of 5 Check Digit

Enable verification of D 2 of 5 check digits.

*Do Not Verify D 2 of 5 Check Digit

Disable verification of D 2 of 5 check digits.

Matrix 25

Enable Matrix 25

Enable scanning for Matrix 25 barcodes.

*Disable Matrix 25

Disable scanning for Matrix 25 barcodes.

Set Lengths for Matrix 25

Matrix 25 - One Discrete Length

Set Matrix 25 to decode only a single specified length.

Matrix 25 - Two Discrete Lengths

Set Matrix 25 to decode only two specified lengths.

Matrix 25 - Length Within Range

Set Matrix 25 to decode within a specified length range.

Standard 25/IATA 25

*Disable Standard 25

Disable scanning for Standard 25 barcodes.

Enable Standard 25

Enable scanning for Standard 25 barcodes.

Set Lengths for Standard 25

Standard 25 - One Discrete Length

Set Standard 25 to decode only a single specified length.

Standard 25 - Two Discrete Lengths

Set Standard 25 to decode only two specified lengths.

Standard 25 - Length Within Range

Set Standard 25 to decode within a specified length range.

Standard 25 - Any Length

Allow Standard 25 to decode any length.

Codabar

Enable Codabar

Enable scanning for Codabar barcodes.

*Disable Codabar

Disable scanning for Codabar barcodes.

Set Lengths for Codabar

Codabar - One Discrete Length Codabar

Set Codabar to decode only a single specified length.

Codabar - Two Discrete Lengths Codabar

Set Codabar to decode only two specified lengths.

Codabar Check Digit Verification

*Disable Codabar Check Digit Verification

Disable Codabar check digit verification.

Enable Codabar Check Digit Verification

Enable Codabar check digit verification.

Start/Stop Character Format

* ABCD/ABCD as the Start/Stop Character

Set ABCD/ABCD as start/stop characters.

*Start/Stop Character in Uppercase

Set start/stop characters in uppercase.

MSI

Enable MSI

Enable scanning for MSI barcodes.

*Disable MSI

Disable scanning for MSI barcodes.

Set Lengths for MSI

MSI - One Discrete Length

Set MSI to decode only a single specified length.

MSI - Two Discrete Lengths

Set MSI to decode only two specified lengths.

MSI - Length Within Range

Set MSI to decode within a specified length range.

MSI Check Character Verification

* One Check Character

Enable one check character verification for MSI.

Two Check Characters

Enable two check characters verification for MSI.

GS1 DataBar/RSS

Enable GS1 DataBar-14

Enable scanning for GS1 DataBar-14 barcodes.

*Disable GS1 DataBar-14

Disable scanning for GS1 DataBar-14 barcodes.

Enable/Disable GS1 DataBar Limited

Enable GS1 DataBar Limited

Enable scanning for GS1 DataBar Limited barcodes.

PDF417

Enable PDF417

Enable scanning for PDF417 barcodes.

Disable PDF417

Disable scanning for PDF417 barcodes.

QR

Disable QRCode

Disable scanning for QR codes.

*Enable QR Code

Enable scanning for QR codes.

Data Matrix(DM)

Disable Data Matrix

Disable scanning for Data Matrix barcodes.

*Enable Data Matrix

Enable scanning for Data Matrix barcodes.

Maxi Code

*Disable MaxiCode

Disable scanning for Maxi Codes.

Enable MaxiCode

Enable scanning for Maxi Codes.

Aztec Code

*Disable Aztec Code

Disable scanning for Aztec Codes.

Enable Aztec Code

Enable scanning for Aztec Codes.

Han Xin Code

*Disable Han Xin Code

Disable scanning for Han Xin Codes.

Enable Han Xin Code

Enable scanning for Han Xin Codes.

Plessey

Enable Plessey

Enable scanning for Plessey barcodes.

*Disable Plessey

Disable scanning for Plessey barcodes.

Check Character Verification

Enable Character Verification

Enable check digit verification.

* Disable Character Verification

Disable check digit verification.

Transmit Check Character

Transmit Check Character

Enable transmission of check characters.

* Do Not Transmit Check Character

Disable transmission of check characters.

Brazil Bank Code

Enable Brazil Bank Code

Enable scanning for Brazil Bank Codes.

* Disable Brazil Bank Code

Disable scanning for Brazil Bank Codes.

COMPOSITE

Enable COMPOSITE Code

Enable scanning for Composite codes.

* Disable COMPOSITE Code

Disable scanning for Composite codes.

EAN/UCC

Enable EAN/UCC Code

Enable scanning for EAN/UCC codes.

Hide Prefix or suffix digits

Hide Barcode Start Chars

Hide starting characters of barcodes.

Hide Barcode Middle Char Start

Hide middle starting characters of barcodes.

Hide Barcode Middle Chars

Hide middle characters of barcodes.

Hide Barcode End Chars

Hide ending characters of barcodes.

Output Format

Custom prefix and suffix

Add Prefix

Scan to add a prefix to scanned data.

Add Suffix

Scan to add a suffix to scanned data.

Clear All Prefix

Clear all configured prefixes.

Numeric Bar Codes

$NO#0

Numeric barcode for digit 0.

$NO#1

Numeric barcode for digit 1.

$NO#2

Numeric barcode for digit 2.

$NO#3

Numeric barcode for digit 3.

Output Format

*Default output format

Set the scanner to use the default output format.

Enable Suffix output

Enable the output of suffix data.

Hide Prefix or suffix digits

Hide Barcode Start Chars

Hide starting characters of barcodes.

Hide Barcode Middle Char Start

Hide middle starting characters of barcodes.

Hide Barcode Middle Chars

Hide middle characters of barcodes.

Hide Barcode End Chars

Hide ending characters of barcodes.

Custom prefix and suffix

Add Prefix

Scan to add a prefix to scanned data.

Add Suffix

Scan to add a suffix to scanned data.

Clear All Prefix

Clear all configured prefixes.

Numeric Bar Codes

$NO#0

Numeric barcode for digit 0.

$NO#1

Numeric barcode for digit 1.

$NO#2

Numeric barcode for digit 2.

$NO#3

Numeric barcode for digit 3.

Output Format

*Default output format

Set the scanner to use the default output format.

Enable Suffix output

Enable the output of suffix data.

Enable Prefix output

Example on how to add normal prefix or suffix on barcode "123456789"

Example on how to add Combination Key suffix for barcode "123456789"

Table 1. ASCII Character Equivalents

Support

Contact Information