Disable UPC-A
Transmit Preamble Character
Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-A
barcode. Select one of the following options for transmitting UPC-A preamble to the host device: transmit
system character only or transmit system character and country code (“0” for USA).
No System Character
System Character & Country Code * System Character
UPC-A Transmit Check Character
* Transmit UPC-A Check Character Do Not Transmit UPC-A Check Character
UPC-A Add-On Code
A UPC-A barcode can be augmented with a two-digit or five-digit add-on code to form a new one.
Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of UPC-A
barcodes with and without 2-digit/5-digit add-on codes.
Disable 2-Digit Add-On Code/ Disable 5-Digit Add-On Code: The engine decodes UPC-A and ignores
the add-on code when presented with a UPC-A plus add-on barcode. It can also decode UPC-A barcodes
without add-on codes.
To Next Page
Loading...
Need help?
General
