Length Within Range
This option sets the unit to decode a code type within a specified range. For example, to decode Code 93
symbols containing between 4 and 12 characters, first scan Code 93 Length Within Range, then scan 0, 4, 1
and 2 (single digit numbers must always be preceded by a leading zero). Numeric Bar Codes is in appendix. To
change the selection or cancel an incorrect entry, scan Cancel in appendix..
Code 93 - Length Within Range
Any Length
Scan this option to decode Code 93 symbols containing any number of characters
Code 93 - Any Length
Code 93 Check Digit Verification
*Verify Code 93 Check Digit
Do Not Verify Code 39 Check Digit
Transmit Code 93 Check Digit
To Next Page
Loading...
Need help?
General
