One Discrete Length
Select this option to decode only those codes containing a selected length. For example, select Standard 25
One Discrete Length, then scan 1, 4, to decode only Standard 25 symbols containing 14 characters. Numeric
Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix.
Standard 25 - One Discrete Length
Two Discrete Lengths
Select this option to decode only those codes containing two selected lengths. For example, select Standard
25 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only Standard 25 symbols containing 2 or 14
characters. Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan
Cancel in appendix.
Standard 25 - Two Discrete Lengths
Length Within Range
Select this option to decode codes within a specified range. For example, to decode Standard 25 symbols
containing between 4 and 12 characters, first scan Standard 25 Length Within Range, then scan 0, 4, 1 and 2
(single digit numbers must be preceded by a leading zero). Numeric Bar Codes is in appendix. To change the
selection or cancel an incorrect entry, scan Cancel in appendix.
Standard 25 - Length Within Range
Any Length
Scan this option to decode Standard 25 symbols containing any number of characters.
NOTE Selecting this option may lead to misdecodes for Standard 25 codes.
Standard 25 - Any Length
To Next Page
Loading...
Need help?
General
