Transmit Code ID Character
A code ID character identifies the code type of a scanned bar code. This can be useful when decoding more
than one code type. The code ID character is inserted between the prefix character (if selected) and the
decoded symbol.
Symbol Code ID Character Code ID
Aim Code ID Character AIM ID
*None
Symbol Code ID Identifiers
UPC-A, UPC-E, EAN-8, EAN-13
GS1-DataBar, /UCC/EAN-128
Bookland EAN, Bookland EAN/ISBN
GS1 DataBar-14, GS1 DataBar Limited, GS1 DataBar Expanded, RSS
AIM Code Identifiers
Each AIM Code Identifier contains the three-character string ]cm where:
] = Flag Character
c =Code Character (see Table 4-4)