To Next Page

To Previous Page

- 25 -

Code 39 - One Discrete Length

Two Discrete Lengths

This option limits decodes to only those Code 39 symbols containing either of two selected lengths. Lengths

are selected from the Numeric Bar Codes in appendix. For example, to decode only those Code 39 symbols

containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To

change the selection or cancel an incorrect entry, scan Cancel in appendix.

Code 39 - Two Discrete Lengths

Length Within Range

This option limits decodes to only those Code 39 symbols within a specified range. For example, to decode

Code 39 symbols containing between 4 and 12 characters, first scan Code 39 - Length Within Range. Then

scan 0, 4, 1, and 2 according to Numeric Bar Codes in appendix. To change the selection or cancel an incorrect

entry, scan Cancel in appendix

Code 39 - Length Within Range

Any Length

Scan this option to decode Code 39 symbols containing any number of characters

Code 39 - Any Length

Code 39 Check Digit Verification

When this feature is enabled, the scan engine checks the integrity of all Code 39 symbols to verify that the

data complies with specified check digit algorithm. Only those Code 39 symbols which include a modulo 43

check digit are decoded. Only enable this feature if your Code 39 symbols contain a module 43 check digit.

Netum NT-1228BL User Manual

Other manuals for Netum NT-1228BL