Netum NT-W5 - Code 128 Configuration; Enable;Disable Code 128; Code 39 Configuration; Enable;Disable Code 39

Code 128
Enable/Disable Code 128
To enable or disable Code 128, scan the appropriate bar code below.
*Enable Code 128 Disable Code 128
Code 39
Enable/Disable Code 39
To enable or disable Code 39, scan the appropriate bar code below.
*Enable Code 39 Disable Code 39
.
Transmit Code 39 Check Digit
Scan this symbol to transmit the check digit with the data.
Transmit Code 39 Check Digit (Enable)
Scan this symbol to transmit data without the check digit.
*Do Not Transmit Code 39 Check Digit (Disable)