EasyManua.ls Logo

NetZero FLA Series - Important Information; Certification; Safety Information

NetZero FLA Series
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
1 IMPORTANT INFORMATION
1.1 Certification
This product has been certified by OMNI-Test Laboratories, Inc. to:
U.S. Certification Standard UL 1370
Canadian Certification Standard CAN/ULC-S674
ISSUED BY: OMNI-Test Laboratories, Inc.
13327 NE Airport Way
Portland, Oregon 97230
1.2 Safety Information
WARNING:
1) Risk of explosion
I. Never use any fuel other than the fuels specifically identified for use in the unvented decorative appliance.
Never use gasoline.
II. Never refill unvented decorative appliance fuel reservoir when appliance is operating or still hot.
III. Never use unvented decorative appliance in areas where flammable vapors or gas may be present.
IV. Never store or transport the fuel in anything other than a metal or plastic container that is:
A) Acceptable for use with the specific fuel
B) Non-red in color
C) Is in the original container for the specific fuel
2) Never store fuel in the living space or same location as the appliance.
3) Due to high surface temperatures, keep children, clothing, and furniture away.
4) Risk of indoor air pollution use unvented decorative appliance only in well-ventilated areas. People with
breathing problems should consult a physician before using the unvented decorative appliance.
5) Do not use unvented decorative appliance to heat or boil water or use as a cooking appliance.
6) Do not use in a room with oxygen tanks in use.
WARNING: This appliance has not been tested with an unvented gas log set. To reduce risk of fire or injury, do not
install an unvented gas log set into this appliance.
WARNING: This appliance has not been tested for use with doors. To reduce the risk of fire or injury, do not install
doors.
- This product is a decorative burner creating real fire.
- Keep the fuel away while the burner is in operation.
- Wipe up fuel spills immediately with a dry cloth or paper towels.
- Do not make any alterations or put any objects or liquids inside the burner.
- Do not touch the filament or other hot elements.
- Do not transport the burner if fueled.
- Do not leave an operating burner unattended.
- Keep the provided USB cable for inspection purposes.
- Do not use the burner in humid or drafty spaces.
!