Neuropace RNS System - Depth Lead Implantation and Fixation Procedure

To Next Page

To Previous Page

Surgical Procedures 36

RNS

System User Manual

RECOMMENDED NEUROPACE

DEPTH LEAD IMPLANTATION AND FIXATION

Burr Hole Placement

1. Make an incision in the scalp at or near the desired burr hole location.

2. Using a standard perforator, create a 14 mm burr hole in the skull.

3. If using a burr hole cap/cover (not provided), secure the cap base to the skull and follow the

manufacturer’s Instructions for Use.

Note: It is necessary to consider the distance from the burr hole to the neurostimulator

implant site when selecting the appropriate lead length for implantation.

Depth Lead Insertion

The depth lead may be implanted using standard stereotactic techniques and planning software. The

following instructions assume that a stereotactic frame is being used; however other stereotactic

methods may be used.

1. Prepare the stereotactic frame for depth lead implantation.

Figure 7: Stereotactic frame assembly example.