Neuropace RNS System - NeuroPace Programmer and Wand Specifications

Specifications and Characteristics 92
RNS
®
System User Manual
IMPLANTABLE RNS
®
SYSTEM COMPONENT AND ACCESSORY MATERIALS
Component or Accessory
Material
CONNECTOR COVER
Polyaryletheretherketone /Titanium
CONNECTOR PLUG
Silicone
CRANIAL PROSTHESIS
Titanium
F
ERRULE
Titanium
F
ERRULE
C
LAMP
Polyaryletheretherketone /Titanium
LEAD CAP
Silicone
LEAD STRAIN RELIEF
Silicone
SUTURE SLEEVE
Silicone
N
EUROPACE
®
PROGRAMMER
D
IMENSIONS
3.3 x 35 x 24 cm
(typical)
MATERIAL
Commercial materials
WEIGHT
2 kg (typical)
O
PERATING
T
EMPERATURE
0
°
C to 35ºC
WAND (MODEL W-02)
DIMENSIONS (LENGTH X WIDTH X DEPTH)
7” x 3.5” x 1.3” (18 cm x 9 cm x 3 cm)
WEIGHT
0.4 pounds (181 g)
POWER SOURCE
USB port of the remote monitor laptop
OPERATING CONDITIONS
Temperature: 32 to 95 °F (0 to 35 °C)
Humidity: 15 to 90%, non-condensing
Atmospheric pressure: 700 to 1060 hPa
MATERIAL
ABS copolymer
LEAST FAVORABLE WORKING CONDITIONS
Wand output power and data rate vary with
communication distance. Communication at
a far distance (3 cm), indicated by a low
signal level when using the wand, results in
the slowest rate of transmission at the
highest output power.
STORAGE AND TRANSPORT TEMPERATURE
32 to 140 °F (0 to 60 °C)
EXPECTED SERVICE LIFE
5 years