88 Series Outboard / 8801 Issue 7.3
Dynamics Sidechain Link
The dynamics sidechain link is available on the 9 pins D-Type connector pins
1-2 and 3-4.
Pins 1 and 3 as well as pins 2 and 4 are in parallel.
Multiple 8801 units can be linked allowing all linked units to be compressed
by the same amount.
Multiple units can be linked together by forming a daisy chain of the
Dynamics Links.
The example below describes how to link 3 units.
Unit 1 Unit 2 Unit 3
Insert
The insert send is on a male XLR and the return is on a female XLR
connector.
The insert can accept a balanced or unbalanced signal.
Line Output
The line output is on a male XLR connector.
It can provide balanced or unbalanced output signals.
Headphone
The headphone output is a on ¼” jack connector.
The level of the headphone output is set by the Output Level knob on the
front panel.
As the 8801 Channel Strip is a mono channel unit, the headphone receives
the same signal on the Left and Right headphone speakers.
- 16 -
To Next Page
Loading...