New Focus 3501 - Store and Recall Instrument Set-Ups

30
MEM*
Store and recall instrument set-ups.
The MEM command, along with the STO and RCL commands, is used to
store and recall one of the 9 instrument set-ups.
After selecting which instrument set-up number to use (1 through 9) using
the STO command, MEM0 will store the current instrument set-up.
After selecting which instrument set-up to recall using the RCL command,
MEM1 recalls the selected set-up.
MEM0 - Store instrument set-up.
MEM1 - Recall instrument set-up.
STO5 (Selects location #5 for storing the current chopper set-up.)
MEM0 (Activates storage to location #5.)
RCL1 (Selects location #1 for recalling a chopper set-up.)
MEM1 (Activates recall of the set-up stored in location #1.)
Command
Description
Explanation
Example
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com