Newco CX-TOUCH - Installation Instructions


Touch Screen Shutdown Instructions
Note: This machine is designed to be run with power cycled on at all times.
Refer to the Startup and Power down instructions below and also attached to the
inside of the sidecar door for shutting down the Touch Screen Display when the
machine is not in use.
When storing machine, or if loss of power occurs, the tablet should
be shutdown using the following procedure:
1. OPENSIDECARDOOR,REMOV E 
KNURLEDSCREW&REMOVE
DISPLAYACCESSCOVER
2. PRESSANDHOLDUPPERON‐OFF
BUTTONFOR10SECONDS
3. PRESS“Poweroff”ICONTOTURN
TABLETOFF
11