Newco FKP-4T - Tank Removal & Access Areas

26
TANK REMOVAL & ACCESS AREAS
REMOVE (3) 8-32
NUTS TO
PREPARE TANK
FOR REMOVAL
(TWO ON TOP
OF TANK & ONE
ON BOTTOM OF
PUMP BRACKET
LOOSEN
SCREWS
BOTH SIDES TO
REMOVE TOP &
BACK COVERS
LOOSEN BUT DO NOT
REMOVE THESE 2
SCREWS THEN LIFT &
PULL CONTROL BOARD &
BRACKET OUT OF
MACHINE TO ACCESS
TRANSFORMER
REMOVE (2) 6-32 SCREWS
TO REMOVE SIDE PANEL
FOR PUMP ACCESS
(REMOVE TOP COVER
BEFORE REMOVING
SIDE PANELS)