Newco FKP-4T - Machine Programming; Programming Menu Overview

11
MACHINE PROGRAMMING
Fig 1: Program
Settings
To enter a programming setting, press and hold the
upper right hand corner of the touch screen when
powering up machine The Fresh Cup pod brewer has a
programming menu that consists of eight icons.
The current entries in the Main menu are as follows:
Temperature
Recipes
Energy Save
Waste Bin
Water Filter
Flow Adjustment
Buzzer Volume
Exit
Flow Adjustment
Allows user to adjust
dispensed volume
calibration
Waste Bin
Set Pod count
before signaling
bin is full
Temperature
Allows
programming of
tank set-point
temperature
Water Filter
Allows user to
select filter size
Exit
Exits the
programming
menu
Buzzer Volume
Allows user to
set the buzzer
volume
Energy Save
Reduces
t
emperature
set-point after
pre-set time has
expired
Recipes
Allows
p
rogramming of
parameters
unique to each
recipe