What to do if my Newland MT65 Beluga has no display?
If your Newland Barcode Reader's display is not working: 1. First, make sure the terminal is switched on. 2. If it's in sleep mode, press the power key to wake it up. 3. Check the battery level and recharge if needed. 4. Ensure the battery is properly installed. 5. If the battery is dysfunctional, replace it. 6. If the problem persists, please contact the after-sales service center.
How to fix USB communication failure on Newland Barcode Reader?
To resolve a USB communication failure with your Newland Barcode Reader: 1. Check that the USB cable connections are secure. 2. Ensure there is no contaminant inside the Micro USB port. 3. If the problem still remains, please contact the after-sales service center.
What to do if my Newland Barcode Reader cannot switch on?
If your Newland Barcode Reader won't switch on: 1. Check the battery level and recharge it if depleted. 2. Try switching it on while connected to a power outlet using the AC adapter. If it works, continue charging. If the issue persists after charging, replace the battery.
Why is my Newland MT65 Beluga Barcode Reader battery life so short?
If you're experiencing noticeably short battery life with your Newland Barcode Reader: 1. Check the battery level and recharge it if it's low. 2. If the battery is not working correctly, replace it.
What to do if fully charged Newland MT65 Beluga battery is depleted after the terminal is switched on?
If a fully charged battery in your Newland Barcode Reader depletes immediately after switching on the terminal, replace the battery with a new one, as it may be defective.
What to do if Newland Barcode Reader system halted?
If your Newland Barcode Reader system halted, this might be due to bugs in downloaded apps or unexpected power loss. Make sure that only reliable apps are used. Remove and then reinstall its battery to reset the terminal.
Why is the charging LED off when charging my Newland MT65 Beluga Barcode Reader?
If the charging LED is off when charging your Newland Barcode Reader, make sure the AC adapter is properly plugged in.
How to fix unresponsive keypad on Newland MT65 Beluga Barcode Reader?
If the keypad on your Newland Barcode Reader is unresponsive or responds incorrectly, this may be due to an unreliable cable connection between the keypad and mainboard, or a keypad malfunction. Please contact Newland after-sales service.
Explains the two primary methods for charging the MT65's battery.
Detailed procedures for switching the device on, off, and performing a reboot.
Guidance on optimal scan angles and distances for reading 1D barcodes.
Guidance on optimal scan angles and distances for reading 2D barcodes.
Details various settings for programming the device's barcode scanner.
Instructions on how to find and connect the device to available Wi-Fi networks.
Crucial safety guidelines for operating and handling the MT65 device.
Warns users against unauthorized disassembly or modification of the device.
Emphasizes the importance of using only the provided AC adapter for charging.
Provides guidance on actions to take in case of unusual device behavior.
Instructs users on the immediate actions required if the device is dropped.
Advises on proper handling and care to prevent damage to the LCD screen.
Warns against placing heavy objects on the terminal to prevent damage or injury.
Details essential safety instructions and guidelines for the device's battery.
Lists common problems encountered with the device and their potential solutions.
General| Model | MT65 Beluga |
|---|---|
| Scanning Technology | 2D Imager |
| Operating System | Android |
| Processor | Quad-core 1.3GHz |
| Memory | 2GB RAM, 16GB ROM |
| WWAN | 4G LTE |
| GPS | Yes |
| Protection Grade | IP65 |
| Operating System Compatibility | Android |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Wireless Communication | WiFi 802.11 a/b/g/n, Bluetooth 4.0 |
| Camera | 8MP rear |
| Battery | 3.8V |
| Interface | USB, RS-232 |
| Power Supply | 5V/2A |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | 1.2 m |
| Display | 4.0 inch, 800 x 480 pixels |
To Next Page