Newland NLS-HR21 - Factory Defaults Table

195
Factory Defaults Table
Parameter
Factory Default
Remark
System Settings
Barcode Programming
Disabled
Programming Barcode Data
Do not transmit
Illumination
On
Aiming
Normal
Good Read Vibration
Off
Good Read Vibration Duration
300ms
Good Read LED
On
Good Read LED Duration
20ms
Good Read Beep
On
Good Read Beep Duration
80ms
Good Read Beep Frequency
Medium (2730Hz)
Good Read Beep Volume
Loud
Power On Beep
On
Default Scan Mode
Manual Mode
Manual Mode
Image Decoding Timeout
100ms
1-3,000ms
Sense Mode
Decode Session Timeout
3,000ms
0-3,600,000ms
Timeout between Decodes
(Same Barcode)
Enabled
15,000ms
1-3,600,000ms
Image Decoding Timeout
100ms
1-3,000ms
Continuous Mode
Timeout between Decodes
500ms
1-10,000ms
Timeout between Decodes
(Same Barcode)
Enabled
15,000ms
1-3,600,000ms
Image Decoding Timeout
100ms
1-3,000ms
Batch Mode
Image Decoding Timeout
100ms
1-3,000ms
Scanning Preference
Normal Mode
Decode Area
Whole Area Decoding
Specify Decoding Area
40% top, 60% bottom, 40% left, 60%
right
Image Flipping
Do Not Flip