ESP302 Controller Start-Up Manual
17 A1270B1 - EDH0411En1021 – 02/20
Procedure for connecting to the controller website:
• Open an Internet Browser and connect to http://192.168.0.254 in case using HOST
connector or connect to http://192.168.254.254 in case using REMOTE connector
Login:
Name: Administrator
Password: Administrator (Please see the picture below).
Role: Administrator
NOTE
Please note that the login text is case sensitive.
Once logged in, the ESP302 has established a direct connection to the local computer.
The user interface is fully described in ESP302 User Interface manual.
If you don’t want to connect the ESP302 controller through a Corporate Network you
may skip to section 3.8: “Connecting the Stages“.
NOTE
If you want to change the HOST IP address of the ESP302 controller, follow the
explanation in the next section.
To Next Page
Loading...
