PPA5xx/15xx user manual
2-1
2 Getting started
PPA5xx/15xx is supplied ready to use – it comes complete
with an appropriate power lead and a set of test leads. It
is supplied calibrated and does not require anything to be
done by the user before it can be put into service.
2.1 Temperature Limits
The temperature limits for storage of the instrument and
during shipping/transportation are:
-10˚C to +60˚C
The instrument must be within 5˚C of the ambient
temperature before operation.
2.2 Unpacking and power-up
Remove the instrument and accessories from the
packaging and check them against the supplied packing
list. Please contact your N4L office or local sales distributor
should any items found to be missing or damaged during
transportation.
Please retain the original packaging to ensure easy and
safe return of the equipment for calibration etc.
If rack mounting brackets have been fitted to the
equipment, please remove them before packaging the
equipment for return. This reduces the risk of damage to
the equipment during transportation.
Before connecting the test leads to an active circuit first
connect the mains cord from a properly grounded supply
outlet to the inlet on the rear panel of the unit.
To Next Page
Loading...
Need help?
General
