PPA5xx/15xx user manual
5-11
- Using the REMOTE menu, select GPIB from the remote
drop down list.
- Select the GPIB bus address that you wish the
instrument to use and press the HOME key to exit the
menu.
- If you have not done so already, connect the GPIB515
to your IEEE bus.
- To confirm that the GPIB515 and PPA link has been
established, press any key (other than HOME) and
confirm that a “REMOTE OPERATION” message is
displayed.
Note: On IEEE488 buses with many instruments
connected, it may be necessary to use the external power
supply provided, to ensure the GPIB515 drives the bus
lines correctly.
To Next Page
Loading...
Need help?
General
