PPA5xx/15xx user manual
8-4
controls the switch on of the power to the DUT from 0˚ to
315˚ in steps of 45˚ from the PPA5xx/15xx front panel.
ENTERing the default settings in inrush mode in the
application menu selects the PCIS and sets the
PPA5xx/15xx to manual ranging. If PCIS is not being
used, then it can be deselected in the AUX menu. Having
selected the default settings, the current range should be
set to an appropriate range for the DUT.
The oscilloscope mode (PPA15xx only) is also useful for
qualitatively evaluating the inrush current.
Note:
Short term inrush current specification available from
N4L upon request.
To Next Page
Loading...
Need help?
General
