PPA5xx/15xx user manual
10-2
STOP button had been pressed. Setting the integration
time to zero, disables the timer.
The Watt-hour integration and the Ampere hour
integration can be selected to be signed or magnitude. To
integrate the total power in terms of heating effect, choose
magnitude. If signed integration is selected, then the rms
current is given the sign of the power before integration.
The Ampere hours and Watt-hours then reflect the power
taken by the load, less any power generated by the load,
such as during regenerative braking in battery systems.
The integrated results may be displayed as the total
accumulated values or as the average over the integration
period.
To Next Page
Loading...
Need help?
General
