36
Natural Gas Conversion for Model# 720/730-0830
Warning: Make sure all grill components are completely cooled down and gas supply is turned off and removed
from grill prior to performing the conversion.
NG Hose and Regulator Conversion
Tools required:
14mm wrench
Phillips Head Screwdriver (+)
1. Turn all knobs OFF. Turn off LP (Liquid Propane) gas supply andremove the LP (Liquid Propane) cylinder
from the grill cart. Remove the brass adapter of the LP regulator from the manifold with a wrench.
2. Install the NG (Natural Gas) regulator hose to the manifold and secure using a wrench. Tighten the NG
regulator on the side panel with two 5/32*10mm screws that pre-assemble on the NG regulator.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
To Next Page
Loading...
