PAGE 19/24
DOWNLOAD
USER MANUAL LOAD1_80
DATE: 30/08/00 12:48
Power the TDcontroller OFF and then back on whilst holding down the MUTE button of channel 1
(leftmost mute). The controller will now enter "Download " mode and the download will start. The
address of the code being loaded will be displayed on both the computer screen and the NX241
whilst the process is in operation. The download procedure is complete when the unit resets (all
LED's on).
6) The NX241 now HAS to be reset AGAIN to enter the configuration menu.
Turn the unit OFF, wait 5 seconds and then power back ON or hold down simultaneously the three
menu buttons (A, B, !").
Hold down the two menu buttons (A, B) to enter into the Configuration Menu to choose your
cabinet.
The unit is now ready for use.
To Next Page
Loading...
