17
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
16
Align the mounting holes on the collar of the Swivel Flight Arm Assembly with the threaded inserts on
the Vertical Posts.
PARTS:
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
17
Bolt through and secure with 4 x M8 Bolts and Washers.
PARTS:
• • NIL
18
Tighten the bolts using the Allen Key.
Tip: Ensure the plastic cap is
not installed to allow for easy
rotation of the Allen Key.
To Next Page
Loading...
