NextBase DUO User Manual

The iN-CAR CAM can be connected to external video equipment, such as a television or a monitor
within your vehicle that uses standard RCA inputs.
Connect the AV cable (sold separately) between the iN-CAR CAM and your external device, then
turn on the iN-CAR CAM. The screen on the iN-CAR CAM will be blank as the video image is now
being sent to the external device, the blue power LED on the iN-CAR CAM will be lit indicating the
unit is turned on.
Make sure that the iN-CAR CAM battery is charged prior to use, as power is not supplied to the
iN-CARCAM via the AV cable.
For prolonged use an external power supply may be required, use the supplied USB cable with a
5Vdc/USB adaptor, of the type typically supplied with mobile phones.
Note:
- ENSURE that any external power sources are of the correct 5Vdc output, otherwise damage will
be caused that is not covered under the manufacturers warranty.
Please contact your local NEXTBASE dealer to purchase the AV Cable (PN: NBDVR-DUO-AVC).
VIDEO & AUDIO OUTPUT
27

NextBase DUO Specifications

General

Product color	Black
Auto power off	Yes
G-shock sensor	-
Number of cameras	2
Maximum frame rate	30 fps
Aperture range (F-F)	2 - 2.2
Main camera resolution	1280 x 720 pixels
Main camera viewing angle	150 °
Video compression formats	MOV
Interior camera viewing angle	22 °
Main camera sensor resolution	1 MP
Output current	1.5 A
Battery capacity	700 mAh
Operating voltage	5 V
Power source type	Battery, Cigar lighter
Display diagonal	2 \
Built-in storage media	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Cables included	DC, USB
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	24 mm
Width	135 mm
Height	52 mm
Weight	95 g