Access the Photo Mode by pressing the MODE button once, from the default VIDEO Mode.
Once selected photo mode will open using the last camera configuration (Wide Angle, Zoom or Dual)
that was last used in video mode.
Use the ‘Camera Select’ button to choose from either the Wide Angle or Zoom cameras.
The key below explains the various information displayed on the screen when your iN-CAR CAM is in
Photo mode, some icons will only be displayed once the relevant function has been selected within
the Photo menu, as described below.
1. Photo Mode: indicates the iN-CAR CAM is in Photo mode.
2. Camera: displays camera selection.
3. Self Timer: appears on screen when the Self Timer function has been turned on.
4. Photo Burst: appears on screen when the Photo Burst function has been turned on.
5. Resolution: displays the image size.
6. Image Count: number of images that can be stored on the memory card.
7. Time: current time.
8. Date: current date.
9. Battery: battery level.
10. White Balance: displays current White Balance setting.
11. Exposure: displays current Exposure level setting.
The default settings within the iN-CAR CAM have been set to allow you to use the iN-CAR CAM
without the need to change any settings.
See the next page for photo menu settings.
11
3
9
1
2
4 5 6
8 7
10
PHOTO MODE
17