The car adaptor is fused in order to protect the car and DVD player from damage as a
result of voltage / current surges, short circuit, cable damage or product failure.
The fuse is user-replaceable by unscrewing the end-cap, take care when removing the
end-cap as there is a spring within the assembly.
unscrew
20mm glass fuse 3A
Replacements fuses are readily available, should you have any difficulties please
contact you local NEXTBASE dealer.
INSERTING A DISC
To open the disc compartment move the OPEN catch located on the top of the DVD
player to the right.
Open the disc compartment by letting the screen move forwards, do not force the screen
to open further.
Note:
Damage caused to the DVD player by opening the screen beyond the design
limit is not covered under the manufacturers warranty.
Place disc onto the spindle with label facing forwards, making sure disc is secure.
Close the disc compartment the DVD player will automatically read the disc.
To Next Page
Loading...
Need help?
General