8
Cable management
Route your power cables neatly
around your windscreen and tuck
into the lining of your vehicle to stop
any loose wires distracting the driver
using the fitting tool (supplied with
your Piqo).
Ensure you tuck the power cable into
the lining of your vehicle to stop any
loose wires distracting the driver. Use
the fitting tool to help tuck the cable
away.
9
Mounting Tip
If you need to remove your Piqo
device from the windscreen, slide the
Dash Cam off the mount.
Dash Cam setup
Installation
14
Make sure that the Piqo power cable does not interfere with the
drivers operating controls, such as the steering wheel, pedals or
gear levers. Do not mount Piqo in front of an airbag field of
deployment or in a position to obscure any mirrors.
To Next Page
Loading...
