26
nextel.com
Adding Words to the User Database
NOTE: You cannot store alphanumeric combinations, such as Y2K.
2
Type a word by using one key press per desired letter.
For example, to type “test” press 8 3 7 8.
NOTE: The displayed word may change as you type it. Do not try to correct the
word as you go. Type to the end of the word before editing.
3
After you have finished typing the word, if the word that appears is not
the desired word, press 0 to change the word on the display to the
next most likely word in the database.
Repeat until the desired word appears.
If the desired word does not appear, you can add it to the database of
words by deleting the displayed word and following instructions in
"Adding Words to the User Database," next.
1
Change from Word text entry mode to Alpha text entry mode (see
“Choosing a Text Entry Mode” on page 23).
2
Type the word using Alpha text entry mode.
3
Return to Word text entry mode.
4
Press R to add a space.
The word you typed in Alpha text entry mode is now in the database.
To Next Page