43
About Phonebook Entries
Storing Numbers and Private IDs Fast
Your phone gives you two ways to store numbers quickly: from the idle screen
and from the Recent Calls list.
6
If you want to assign a voice name to the number, with the Voice Name
field highlighted, press C under RECRD.
As directed by the screen prompts, say and repeat the name you want to
assign to the number. Speak clearly into the microphone.
USER TIP: For best results, use voice names such as “Joe Home” or “Susan
Work” and record in a quiet environment.
An icon appears in the Voice Name field indicating that the voice
name has been recorded.
If you do not want to store a voice name for this number, continue to the
next step.
If you want to store more numbers to the name associated with this
Phonebook entry, press R to scroll to Type and then press C under
CHNGE.
The Type Editor displays.
Enter the information for the additional number using step 3 through
step 7.
NOTE: Each name in your Phonebook may have up to seven phone numbers, one
Private ID, and one IP address associated with it.
7
When you have entered all the information for the Phonebook entry,
press C under DONE.
1
To store a number from the idle screen, use the alphanumeric keypad
to enter the number you want to store. For phone numbers, use the 10-
digit format. For Private IDs, use Area ID*Network ID*Member ID.
2
Press q to access the Dialing Menu screen.
3
With Store Number highlighted, press C under SELECT.
This displays the Store To screen with [New Entry] highlighted.
To Next Page