Introduction
Welcome to the Tutorial Flight for the Citation CJ4X! You have purchased one of the most magnificent
corporate jet aircraft ever available for Flight Simulator and Prepar3D. And now, it’s time to learn how
to fly it! This document has been designed to get you up and flying right away the aircraft while, at
the same time, you explore some of the most important features of this product.
We are aware that many simmers just want to jump ahead to the action, by loading the airplane on
the runway, programming a route and be airborne in a very short time – That’s what this tutorial is all
about. We are not going to follow the exact procedures and flows from the Checklists or Normal
Procedures, like a real-life crew would do. Instead, this tutorial covers the basic steps you need to take
in order to ensure correct setup of FMC and operation of the airplane in flight. You will be able to
have virtually any route programmed and be in the air within about 5 to 10 minutes using these
methods provided you start on the runway with the engines running.
This tutorial contains also a “Cold & Dark” startup supplement near the end of the document, for
users who wish to learn that procedure right away. This document may seem quite long but much of
it is explanations and screenshots. We think it is important to not only know and understand what to
do when operating the airplane, but also why you are doing it.
We hope you enjoy this flight!
To Next Page
Loading...