15
4.2.6 Power steering
To select power steering, press MODE until the page-arrow appears
under PWR ST, and Rudder Angle Indicator [RAI] is flashing on the
lower-line. Your present course is displayed on the top-line.
To activate power steering, press KEY when [RAI] is flashing.
The rudder angle, followed by a sign for port or starboard is displayed
on the lower-line.
To change the rudder angle to starboard press RIGHT and hold it, until
the desired rudder angle is displayed.
To change the rudder angle to port press LEFT and hold it, until the de-
sired rudder angle is displayed.
4.2.7 Dodging and returning to last automatic steering function
To dodge, turn off the automatic steering by pressing KEY and dodge
manually.
If you want to re-activate the last steering function and value, press
MODE and KEY together, within 10 minutes after turning off the auto-
matic steering.
This function is not available after 10 minutes after Autopilot off, or if
the Autopilot has been turned off by pressing KEY for more than two
seconds.
FUNCTION
To Next Page
Loading...
